Copper dics and sterling hoops onn sterling earwires.
Handmade copper discs and sterling hoops have a radial texture and have been highly polished.
They are hung on handmade 20ga sterling earwires that have been soldered to prevent the dangles from falling off.
Approx 1 7/8 in length and 1in wide.
Copper dangle earrings made with domed textured discs.
The discs have been hand textured in three seperate styles, diamond,dimple,and radial and domed by hand with a peen hammer.
They are connected with handmade, soldered jumprings for durability.
The pieces are highly polished and laquer coated to preserve the finish.
Hung on copper earwires.
Approx length is 2 3/4 and 1″ in width.
Sure to be noticed when wearing these!
Sterling pendant made from a 1″ round disc that has been punched to various size rings.
Each ring was then hand textured, arranged to the design and soldered in place.
This piece has been oxidzed to a gold tone in various shades.
The length is approx 2″ and the width 1″.
Round bail will accept up to 5mm.
Part of my circle series!
Heavy gauge band made from #2 copper.
Copper band has been hammered to approx 1/4in in width and the surface textured in a very light diamond like patteren to add reflective surface.
The band is finished with barrel ends and the entire piece has been highly polished.
There is no protective coating applied so this piece will oxidize with time and wear.
The inside measurement (I.D.) is 5 3/4in.
This is a nice size for a man.
This band was made from forged #4 copper and has what I call a wood grain texture.
It was first hammered out smooth and then the texture applied with a small cross peen hammer.
After working these copper pieces, they work harden, and have to be softened with heat.
They are then acid cleaned and wire brushed.
This piece was then hand polished with a cleaning cloth.
The result is a very warm, shiny, fine copper finish, my favorite of all the finishes I do.
No protective coating has been applied so this piece oxidize with age and use.
Inside measurement is approx 6″ and 1/4″ wide.
Made with forged #4 copper this band has a dimple finish.
After being hammer smooth the texture was applied using a ball peen hammer.
After working these copper pieces they work harden and have to be softened with heat.
They are then acid cleaned and wire brushed.
This piece was then hand polished with a cleaning cloth.
The result is a very warm, shiney, fine copper finish, my favorite of all the finishes I do.
No protective coatings have been applied so this piece will oxidize with age and use.
Inside measurement is approx 6″ and 1/4″ wide.
This heavy gauge band is made from hammer forged #4 copper.
The deep surface texture has been applied using a diamond pattern hammer with overlapping strikes.
Ends of the band have been rounded for a more comfortable wear, and the entire piece has been highly polished and is not coated.
The band measures approx 5 7/8″ inside and 1/4″ in width.
Nice size band for a man.
Dual textured copper strip pendant with heavy gauge ring bale. Wood grain texturing the length of the piece with random punched dimples. Piece was wire brushed to a satin finish and laquer coated front & back to maintain color. Approximately 2-1/8″ in length including bale and approximately 3/8″ in width.
.
.
Twisted heavy gauge copper band with a satin wire brush finish. Approximately 6-3/4″ in length with handmade barrel ends for comfort. Approximately 1/4″ wide. Not coated, natural finish.
.
.
Copper bypass ring that is half textured and half smoooth finish. Highly polished. Copper is untreated and will oxidize naturally.
Size 8-1/2.
Approximately 1/4″ in band width and approximately 1/2″ at its widest.
.
.
website Lillicotch.com
Powered by WordPress
Powered by eShop v.6